Delete memory in receiver
Each receiver has memory for three differe
nt transmitters. Once the memory is full, you can
either delete the entire memory or one specific transmitter.
Delete the entire memory
1.
Connect a bulb or other load to the receiver
2.
Place the receiver in the wall socket
3.
The LED on the receiver will n
ow flash for 5
seconds while the receiver is in learning mode.
4.
Press All Off on the remote control while the
LED on the receiver is flashing. The connected
bulb will flash twice to confirm that deletion has
been successful.
Delete individual units
1.
Connect a bulb or other load to the receiver
2.
Place the receiver in the wall socket
3.
The LED on the receiver will now flash for 5
seconds while the receiver is in learning mode.
4.
Press the Off button for the receiver you wish to
disconnect from the transm
itter. The connected
bulb will flash twice to confirm that deletion has
been successful.
