Installing your
Built-in
Hob
Bringing it all together
Electrical connection
Appliances with three-pole cable are set up for operation with alternating current at the
voltage and frequency indicated on the rating plate. The earth conductor is yellow/green.
The connection to the electricity supply must be made by a qualified person and
following the regulations in force.
When the appliance is to be installed above a built-in oven, the two appliances must be
connected separately, to make it easier to take the appliances out and for electrical
safety.
The supply cable must be so positioned that no point can reach a temperature 50° C higher
than ambient temperature.
Also check that the supply system has an effective earth connection and corresponds to the
standards in force and that the plug (or omnipolar switch) can be reached easily when
the appliance is installed.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
• Green and yellow: Earth
• Blue:
Neutral
• Brown:
Live
Getting to know your Built-in Hob
17
or online at
www.newworldassist.co.uk
If you still require further assistance, call one of our experts on
0
333 305 2263
Neutral
Live
Earth
Summary of Contents for NWSP60B
