manualshive.com logo in svg

Newworld NWDHTE1014X, Instruction Manual, Page: 26 / 44

Share
Download
Newworld NWDHTE1014X Instruction Manual Download Page 26

Important Informations

• Use detergents, softeners and other additives suitable for automatic washing machines only. Excessive foam has 

occurred and automatic foam absorption system has been activated due to too much detergent usage.

• We recommend that periodic cleaning for washing machine every 2 months. For periodic cleaning please use Drum 

Clean programme. If your machine do not have Drum Clean programme, use Cottons-90 programme. When required, use 
limescale removers manufactured specifically for washing machines only.

• Never force the door open when your Washing Machine is running. You can open the door of your machine 2 minutes 

after the completion of a washing operation. *

• Never force the door open when your Washing Machine is running. The door will open immediately after the washing 

cycle has ended. *

• The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid 

possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by 
unauthorised persons.

(*) Specifications may vary depending on the machine purchased.

Summary of Contents for NWDHTE1014X













































Reviews:

No comments