Newworld NW 50GSO Blk/444443994, Operating And Installation Instructions, Page: 12 / 29

As gas is turned on, all connection parts and hose
s
must be checked with soapy water
or leakage fluids. Do not use naked flame to check
for
gas leakage
s
. All metal
components used during gas connection must be clear of rust. Also check the expiry dates
of components used.
The gas inlet of this product is on the right side of the appliance. If connection point needs to be
moved to the left side of the appliance, you can request an extension pipe from
an
authorized service company.
What to check during fixed gas connection assembly
- During connection, always keep the nut on the gas manifold fixed, whilst rotating the
counter-part.
- Use the correct sized spanners to ensure a secure and safe connection.
- Always use the seals provided in the spare set for all the surfaces between different
components, and these seals must have been approved to be used in gas connections.
- Do not use plumbing seals for gas connections.
You must call a qualified and certified registered gas fitter to connect the gas to
the appliance for you so that it's done safely, appropriately and in compliance
with safety standards.
WARNING: Do not use any match or lighter to control a gas leak.
!
Adapter
Gas Pipe Gas Pipe Gas Pipe Gas Pipe
Seal
Seal
Seal
Hose
Fitting
Gas Hose
with Collar
Mechanical
Gas Hose Mechanical
Gas Hose
Mechanical
Gas Hose
Figure 4