NewTek TriCaster TCXD300, User Manual

Page: 59 / 290

Page | 43
4. Find the icon named “3tone_quad.WAV” in the file pane. This is a four channel audio
file, with a mid-range tone on channel 1, a higher tone on channel 2, while both
channels 3 and 4 both carry a lower tone.
5. Select the icon for this file, and click OK to add this sound file to the DDR playlist.
6. Turn on both Single and Loop for the DDR , then turn Follow off for the DDR
7. Click the Audio tab, and Mute Inputs 1-3 (click the speaker icons at upper-right in each
input control panel, so they show a red stroke through them).
Figure 35
8. Make sure DDR audio is not muted (Figure 35).
9. Set the DDR’s Gain slider to 0dB (you can do this quickly by holding down the keyboard
Shift key while double-clicking the Gain knob.)
Figure 36