NewTek TriCaster TCXD300, User Manual

Page: 147 / 290

Page | 131
2. You can set iVGA to show either of two monitors, when you have more than one
attached.
3. Open at Login will automatically launch iVGA for you every time you login, if you wish.
9.1.2 IVGA FOR WINDOWS®
The iVGA installation for Microsoft
Windows® systems is supplied as an
executable (program) file.
To install it, first establish a network
connection between the client system and
TriCaster. Then copy this file to the client
system.
Note: iVGA will run from anywhere you put it on the client hard drive, but you might wish to
install it in the Program Files folder (Program Files (x86) for a 64bit version of Windows.
Run iVGA on the client computer by double-clicking its icon. A smaller icon will be added to the
Windows
task tray . To select this external computer as TriCaster’s current Network source, click
the triangle that appears next to the Configure button for the Network monitor when you roll
the mouse pointer over it. The iVGA icon begins cycling – notifying you that this is a live input.
Right-clicking the little icon (on the iVGA client system) reveals a menu with various options
(Figure 119):
Setup allows you to choose between monitors on a dual-screen system. You can also decide
whether or not to Show Mouse Cursor in the display. Refresh Overlay is there in case you need
Figure 119 – iVGA context menu, Windows® version