Introduction
Reference Manual for EL470 IP Satellite Modem
Command
<Technical Command
Name – for future use>
<The name of the command, also visualised in the
GUI (Graphical User Interface / Web Interface)>
which the GUI is working
The displayed range of parameter values may differ depending on
the configuration of the device. The values given in this manual
are applicable for the device in full option configuration.
Example
•
Table of description of the 'Device serial number' command.
Command
SyDev Sn
Device serial number
Location
/Unit/Architecture
Description
This number should be the same as the serial number on the backpanel
label (for rack mounted units).
RMCP
Command
SLs
Access
Normal user : R
Expert user : R
SNMP
Table
ntcDevsMod01SystemEntry
Command
ntcDevsMod01SyDevSn
OID
1.3.6.1.4.1.5835.3.1.1.1.31.0.1
Values
Factory Default
03051439
String Description
length : 8 (fixed)
format : Hexadecimal chars
Structured Command
Description
A structured command can have more than one argument that are separated by
commas ','. These are especially useful to get or set parameters that are closely
related.
You can read and/or set this structure in the EL470 through one single command.
In some cases, structured variables are designed for efficiency, for example to
communicate less data. In other cases, structured variables are designed so you
can set or read closely related variables immediately.
In this way, you can avoid invalid intermediate states, which could occur if you
were to set the components one by one.
version 3.1
4
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
