NewStar NS-431, User Manual, Page: 8 / 14

8
NS-431
9
NS-431
Keyboard
Monitor
Front View
Rear View
Mouse
Installation
Step-by-Step Installation
This manual provides you complete setup instruction for the NEWSTAR
4-PORT KVM Switch.
Please turn off all computers before connecting to the NEWSTAR
4-PORT KVM Switch. Unplugging and re-plugging cables while
computers are powered on might damage your computers, data, and/or
the KVM Switch. NEWSTAR will not be responsible for such damage.
You will need the following items to install the switch.
NEWSTAR 4-PORT KVM Switch.
One keyboard, monitor, and mouse.
One KVM cable kit per computer installed.
Connecting the console (Step. 1)
1.Turn off all computers.
2.Connect a PS/2-type keyboard to the PURPLE port on the rear panel
//// keyboard port.
3.Connect a PS/2-type mouse to the GREEN port on the rear panel
//// mouse port.
4.Connect the monitor to the � Console VGA � port on the rear panel of
//// the 4-PORT KVM Switch.
Installation
Connecting the computer (Step.2)
1.Connect the first computer’s PS/2 keyboard and mouse cable to / the
back panel of the KVM Switch that labeled PC1.
2.Connect the first computer’s VGA cable to the VGA port in the back
//// panel of the 4-PORT KVM Switch that labeled PC1.
3.Repeat steps 1 and 2 for each additional computer you wish to
//// connect to the KVM Switch in other port.
Please turn on your computers. Your NS-431 is now ready to use.
Rear View
Monitor
Mouse
Keyboard