12
13
System Setup
The System Set function area can select the operating
language of the OSD interface, the position of the OSD
interface, the transparency, the screen volume ... and so
on. Press the up, down, left, and right sides of the Rocker
key to enter the desired adjustment function. After
entering the desired adjustment function, the upper and
lower sides can adjust the parameter value or the on / off
function. After adjustment, press the right side to confirm
and press the left side to cancel.
User Data
User Data can store / read user-defined parameters.
ICARUS RGB supports three groups of user-defined
archives. To save the current custom parameters, select
the field to be saved (eg User1) and select Save to save
all the current parameter values. To read the previously
stored parameters, select the field to be read (eg User1),
select Load, and the system will read and replace all
values with the previously stored parameters.
3.5 Safety protection
When the video signals of PC exceeds the frequency range of the display, the horizontal and field synchronizing signals will
be shut down to protect the display. Then, you have to set the PC output frequency to an acceptable range so as to make the
display work normally.
Phenomenon
Truobleshooting
Light out / power indicator lights is off
Check whether the display and the socket are well connected to power, and
whether the diplay is in the shutdown mode.
Image blurring, over-large, over-small, etc.
Enter the menu "Image Setting" and select "Auto Image Adjust" to automatically
adjust the display.
Image over dark
Enter the menu "Brightness and Contrast" to adjust the brightness and
contrast of the display.
Display over heat
Leave at leat 5cm of distance for ventilation around the display and do not
place articles on the display.
Dark / light spots when powering on
This is a normal phenomenon. It is due to the backlight illuminates unevenly
at the initial phase of powering on caused by temperature difference. The
backlight can illuminates normally after 20 minutes, and the the dark/light
spots will be corrected.
Image distortion, blinking, shaking
Check computer setting, select the correct resolution and re-adjust the refresh
frequency.
Power off noise
It is a normal phenomenon caused by display dischargeing in the process of
powering off.
Panel size
27"
Optimal working resolution
2560 x 1440@165Hz
Power input
DC 12V 4.5A
Product has been filed on China energy label website
Yes
Blue-light filtering
Support
Flicker-free
Support
Requirements for working environment
Barometric pressure
86kpa~104kpa
Working temperature and humidity
0°C|~40°C 20%~85%
Warehousing temperature and humidity
-10°C~60°C 10%~90%
Packing size (W * H * T) and weight
Unpacked size (W * H * T) (with base)
616*464.75*251.8mm
Packing size (W * H * T)
705*167*532mm
Net weight
3.96 kg
Gross weight
6.9 kg
4. Basic Troubleshooting
5. Technical Specifications of Product
