Newport PScout2 Series, User Manual

Page: 16 / 61

3. Installation
3. Installation
3.1. Contents of Delivery
Pulse Scout2 base unit - consisting of:
ˆ scout Link controller
ˆ Pulse Scout2 optical head
ˆ 25-pin D-Sub connection cable for the optical head
ˆ USB cable type "A-B"
ˆ Trigger input cable
ˆ Alignment base
ˆ Foot clamps (3x)
ˆ M6 screw
ˆ Nylon washer
ˆ 12-V DC power supply (US)
ˆ Detector ansh (mounted)
ˆ M4 screw (mounted)
ˆ Pulse Scout2 user manual
ˆ Certi cate of Calibration
ˆ USB Flash Drive, including installation software
ˆ Final Test Protocol
Pulse Scout2 detector module incl. crystal (packed separately)
3.2. Inspection on Receiving
On receipt of the Pulse Scout2 autocorrelator system:
1. Inspect the packing material for signs of rough handling or damage directly at arrival.
If you discover any irregularities:
ˆ Take photographs of the condition of the package, the labels and the inside of the box,
if necessary.
ˆ Inform your Pulse Scout2 vendor immediately.
2. Use safe lifting practices.
3. Allow at least six hours for acclimatization of all components before unpacking and operating
the device.
4. Unpack the Pulse Scout2 system.
5. It is suggested to retain the packaging for future use.
Pulse Scout2 Version 1.1 16 July 2015