Newport Oriel VeraSol LSH-752 User Manual Download Page 7

March 2019 

VeraSol 

Safety Marking Symbols 

This section provides a description of the safety marking symbols that may appear on the instrument. 
These symbols provide information about potentially dangerous situations which can result in death, 
injury, or damage to the instrument and other components.  
 

 

Caution, refer 
to manual 

 

Earth ground 
Terminal 

 

Alternating current 

 

 

Caution, risk of 
electric shock 

 

Protective 
Conductor 
Terminal 

 

Frame or chassis 
terminal 

 

 

Laser radiation  
hazard 

 

Warranty 

Oriel Instruments warrants this instrument to be free from defects in material and workmanship for a 
period of one year from date of shipment. During the warranty period, Oriel Instruments will repair or 
replace the unit, at our option, without charge. 

Limitations 

This warranty does not apply to fuses or defects caused by abuse, modifications, or to use of the 
product for which it was not intended. 

This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty of 
merchantability or fitness for any particular purpose. Oriel Instruments shall not be liable for any 
incidental, special, or consequential damages. 

If a problem occurs, please contact Oriel Instruments with the instrument's serial number, and 
thoroughly describe the nature of the problem. 

 

 

Summary of Contents for Oriel VeraSol LSH-752















































Reviews: