9
Always grasp the plug portion when unplugging the power plug. Pulling on the power cord
may expose or snap the core wire, or otherwise damage the power cord. If the cord is
damaged, this could cause an electricity leak and result in a fire or electrical shock.
CAUTION!
Do not use accessories other than the provided (e.g. power cord). Plug the power cord only
in grounding equipment conductor power sockets.
Do not place any heavy objects on any cables (e.g. power cords, sensor cables, actuator
cables, optical cables).
Do not block ventilated openings or place the units near a radiator, oven or other heat
sources. Do not put anything on top of the units except those that are designed for that
purposes (e.g. actuators).
Plug the power cord completely in the grounding equipment conductor power sockets so
that it cannot loosening inadvertently.
Leave sufficient space around the power plug so that it can be unplugged easily. If objects
are placed around the power plug, you will be unable to unplug it in an emergency.
Install the system in that way that the on/off-switch is accessible without problems.
6.2 Operation
Please note the area with general safety precautions (see section 6ons”)
RISK
OF ELECTRIC SHOCK!
Do not spill inflammable substances inside the voltage amplifier. If these items come into
contact with an electrical component inside the voltage amplifier, this may result in a fire or
electrical shock.
CAUTION!
If the voltage amplifier emits smoke, big heat or unusual smells, immediately turn off the
power switch and unplug the power plug from the outlet. Then contact our technical service.
