Newport New Focus Picomotor 8743-CL, User Manual

Page: 30 / 133

30
3.4 Status Indicator
The LED located near the power switch has several functions:
• Power Indicator
•
Status Indicator
•
Troubleshooter
Status Indicators position
When the unit is turned on the unit goes through a series of verifications and turns the
LED solid green. The unit is ready to drive Picomotors.
If any problems are found, the LED will blink or turn on a color corresponding to the issue
found. Please refer to the following table and contact New Focus support if this happens.
CONDITION LED STATE
No power applied to unit OFF
Unit OK; no critical errors detected Solid green
Reboot condition occurred Fast blinking green for 0.5 second
Unit OK; 8758 hand control pad detected Slow blinking amber
Corrupted firmware detected Solid amber
Critical fault detected (e.g. over-temperature) Solid red
Table 1 LED Status Indicator
Status
Indicator
Power
Switch