PART 1
INTRODUCTION
1.1 Safety and EMC Considerations
The instrument is a Class III device (10 to 32 VDC).
Always use a power supply, which complies with EN 60950 safety standard.
EMC Considerations
•
Whenever EMC is an issue, always use shielded cables.
•
Never run signal and power wires in the same conduit.
•
Use signal wire connections with twisted-pair cables.
•
Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.
Failure to follow all instructions and warnings may result in injury!
2
