5
6
SETTING OUTPUT SCALE AND OFFSET
(continued)
Out 1
(OUTPUT 1)
Press ‘
RESET/ENTER
’
14) Display flashes 1st digit of
previous "
OUt 1
" value.
Press ‘
䊱
/MAX
’ & ‘
䊳
/MIN
’
15) Enter "
OUt 1
" value.
(Example 0000.00).
Press ‘
RESET/ENTER
’
16) Display advances to
"
REAd 2
" Reading 2 menu.
REAd 2
(READING 2)
Press ‘
RESET/ENTER
’
17) Display flashes 1st digit
of previous "
Reading 2
" value.
Press ‘
䊱
/MAX
’ & ‘
䊳
/MIN
’
18) Enter "
Reading 2
” value.
(Example 999999).
Press ‘
RESET/ENTER
’
19) Display advances to
"
OUt 2
" Output 2 menu.
Out 2
(OUTPUT 2)
Press ‘
RESET/ENTER
’
20) Display flashes 1st digit of
previous "
OUt 2
" value.
Press ‘
䊱
/MAX
’ & ‘
䊳
/MIN
’
21) Enter "
OUt 2
" value.
(Example 0010.00).
Press ‘
RESET/ENTER
’
22) Display Display shows
"
StOREd
" stored message
momentarily and then advances
to the "
SP CNF
" SetPoint
Configuration menu.
The above example is for 0-10 V of the entire
range of the process input and analog output. For
0-20mA output you need to set "
MOdE
" to "
CURRNt
"
DC-Current output and "
OUt 2
" to 0020.00.
SPECIFICATIONS
Analog Output:
0-5 V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA level; 14-bit
resolution; 0.1% accuracy; 6 msec step response.
Isolation
:
Power to Input / Analog, Comm, Ethernet, & Relay Output:
2500 Vac per 1 min. test
Relays to Inputs / Analog, Comm, & Ethernet Outputs:
2500 Vac per 1 min. test
Ethernet to Inputs / Analog Outputs:
1500 Vac per 1 min. test
Between Inputs / Analog & Comm Outputs:
500 Vac per 1 min. test
CONFIGURING THE OUTPUT
(continued)
MOdE
ENTER OUTPUT MODE CONFIGURATION SUBMENU:
Press ‘
RESET/ENTER
’
5) Display shows "
StOREd
"
stored message momentarily
and advances to "
MOdE
" to
allow users to select Output
type as Voltage (0-10Vdc or
Current (4-20mA-dc) source.
Press ‘
RESET/ENTER
’
6) Display flashes "
VOLt
"
(default) DC-Voltage output
option or previous selection
("
CURRNt
" DC-Current output).
Out.tyP
ENTER OUTPUT TYPE CONFIGURATION SUBMENU:
Press ‘
RESET/ENTER
’
7) Display shows "
OUt.tyP
"
Output Type Submenu.
Press ‘
RESET/ENTER
’
8) Display flashes "
UNF ILt
"
Unfiltered option or previous
selection.
Press ‘
䊱
/MAX
’
9) Scroll though and select
the following options for your
choice of setting:
"
UNF Ilt
": Transmits the unfiltered value of your signal input.
"
FILtRd
" : Transmits the filtered value of your signal input.
"
PEAk
" : Transmits the recorded Peak "
HI RdG
" Reading
value(s).
or "
VALLy
" : Transmits the recorded Valley"
LO RdG
"
Reading value(s).
SETTING OUTPUT SCALE AND OFFSET
OT.SC.OF
ENTER OUTPUT SCALE & OFFSET
CONFIGURATION SUBMENU:
REAd 1
(READING 1)
Press ‘
RESET/ENTER
’
10) Display shows "
REAd 1
"
Reading 1 menu.
Press ‘
RESET/ENTER
’
11) Display flashes 1st digit of
previous "
Reading 1
" value.
Press ‘
䊱
/MAX
’ & ‘
䊳
/MIN
’
12) Enter "
Reading 1
" value.
(Example 000000).
Press ‘
RESET/ENTER
’
13) Display advances to
"
OUt 1
" Output 1 menu.
Ot.SC.OF
(Output Scale & Offset)
REAd 1
value
OUt 1
value
REAd 2
value
OUt 2
value
FILtRd
(Filtered)
OUt.tyP
(Output Type)
UNFILt
(Unfiltered)
PEAk
VALLy
TRADEMARK NOTICE:
,
,
,
newportUS.com
,
,
,
,
and the “Meter Bezel Design” are trademarks
of NEWPORT Electronics, Inc.
TM
®
NEWPORT
®
NEWPORT
®
This device is marked with the international caution symbol. It is important to read the
Setup Guide before installing or commissioning this device as it contains important
information relating to safety and EMC.
WARNING:
These products are not designed for use in, and should not be used for, patient
connected applications.
It is the policy of NEWPORT to comply with all worldwide safety and EMC/EMI regulations that
apply. NEWPORT is constantly pursuing certification of its products to the European New Approach
Directives. NEWPORT will add the CE mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but NEWPORT Electronics,
Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications
without notice.
THENEW STANDARD FOR QUALITY
INF-B
Isolated Analog Output Option
For immediate technical or application assistance please call:
Newport Electronics, Inc.
2229 South Yale Street • Santa Ana, CA • 92704 • U.S.A.
TEL: (714) 540-4914 • FAX: (714) 546-3022
Toll Free: 1-800-639-7678 • http://www.newportUS.com • e-mail:[email protected]
ISO 9001 Certified
Newport Technologies, Inc.
976 Bergar • Laval (Quebec) • H7L 5A1 • Canada
TEL: (514) 335-3183 • FAX: (514) 856-6886
Toll Free: 1-800-639-7678 • http://www.newport.ca • e-mail:[email protected]
Newport Electronics, Ltd.
One Omega Drive • River Bend Technology Centre
Northbank, Irlam • Manchester M44 5BD • United Kingdom
Tel: +44 161 777 6611 • FAX: +44 161 777 6622
Toll Free: 0800 488 488 • http://www.newportuk.co.uk • e-mail:[email protected]
Newport Electronics B.V.
Postbus 8034 • 1180 LA Amstelveen • The Netherlands
TEL: +31 20 3472121 • FAX: +31 20 6434643
Toll Free: 0800 0993344 • http://www.newport.nl • e-mail: [email protected]
Newport Electronics spol s.r.o.
Rudé armády 1868, 733 01 Karviná 8 • Czech Republic
TEL: +420 69 6311899 • FAX: +420 69 6311114
Toll Free: 0800-1-66342 • http://www.newport.cz • e-mail: [email protected]
Newport Electronics GmbH
Daimlerstrasse 26 • D-75392 Deckenpfronn • Germany
TEL: 49 7056 9398-0 • FAX: 49 7056 9398-29
Toll Free: 0800 / 6397678 • http://www.newport.de • e-mail: [email protected]
Newport Electronique S.A.R.L.
11, rue Jacques Cartier • 78280 Guyancourt • France
TEL: +33 1 61 37 29 00 • FAX: +33 1 30 57 54 27
Toll Free: 0800 466 342 • http://www.newport.fr • e-mail: [email protected]
Mexico and Latin America
TEL: 001-800-826-6342 • FAX: 001 (203) 359-7807
En Español: 001 (203) 359-7803
M2548/N/0802
Warranty/Disclaimer
NEWPORT Electronics, Inc. warrants this unit to be free of defects in materials and workmanship
for a period of
one (1) year
from the date of purchase. In addition to NEWPORT’s standard
waranty period, NEWPORT Electronics will extend the warranty period for
four (4) additional
years
if the warranty card enclosed with each instrument is returned to NEWPORT.
If the unit malfunctions, it must be returned to the factory for evaluation. NEWPORT’s Customer
Service Department will issue an Authorized Return (AR) number immediately upon phone or
written request. Upon examination by NEWPORT, if the unit is found to be defective, it will be
repaired or replaced at no charge. NEWPORT’s WARRANTY does not apply to defects resulting
from any action of the purchaser, including but not limited to mishandling, improper interfacing,
operation outside of design limits, improper repair, or unauthorized modification. This
WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence
of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of
NEWPORT’s control. Components which wear are not warranted, including but not limited to
contact points, fuses, and triacs.
NEWPORT is pleased to offer suggestions on the use of its various products. However,
NEWPORT neither assumes responsibility for any omissions or errors nor assumes
liability for any damages that result from the use of its products in accordance with
information provided by NEWPORT, either verbal or written. NEWPORT warrants only that
the parts manufactured by it will be as specified and free of defects.
NEWPORT MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND
WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED
WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and
the total liability of NEWPORT with respect to this order, whether based on contract,
warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the
purchase price of the component upon which liability is based. In no event shall
NEWPORT be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by NEWPORT is not intended to be used, nor shall it be used:
(1) as a "Basic Component" under 10 CFR 21 (NRC), used in or with any nuclear installation or
activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or
with any nuclear installation or activity, medical application, or used on humans, or misused in any
way, NEWPORT assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER
language, and, additionally purchaser will indemnify NEWPORT and hold NEWPORT harmless
from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.
Direct all warranty and repair requests/inquiries to the NEWPORT Customer Service Department.
BEFORE RETURNING ANY PRODUCT(S) TO NEWPORT, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM NEWPORT’S CUSTOMER SERVICE DEPARTMENT
(IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on
the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR WARRANTY RETURNS, please have the
following information available BEFORE
contacting NEWPORT:
1. P.O. number under which the product was
PURCHASED,
2. Model and serial number of the product under
warranty, and
3. Repair instructions and/or specific problems
relative to the product.
FOR NON-WARRANTY REPAIRS, consult
NEWPORT for current repair charges. Have the
following information available BEFORE contacting
NEWPORT:
1. P.O. number to cover the COST of the repair,
2. Model and serial number of product, and
3. Repair instructions and/or specific problems
relative to the product.
NEWPORT’s policy is to make running changes, not model changes, whenever an improvement is
possible. This affords our customers the latest in technology and engineering.
NEWPORT is a registered trademark of NEWPORT Electronics, Inc.
© Copyright 2002 NEWPORT Electronics, Inc. All rights reserved.
This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form, in whole or in part, without prior written consent of NEWPORT
Electronics, Inc.
PATENT NOTICE: This product is covered by one or more of the following patents: U.S. Pat. No.
Des. 336,895; 5,274,577; 6,243,021 / CANADA 2052599; 2052600 / ITALY 1249456; 1250938 /
FRANCE BREVET No. 91 12756 / SPAIN 2039150; 2048066 / UK PATENT No. GB2 249 837;
GB2 248 954 / GERMANY DE 41 34398 C2. OTHER INTERNATIONAL PATENTS PENDING.
Return Requests/Inquiries
OPERATION MANUAL
