
O P E R A T I O N
Laser Diode Mounting
8
LDM-4405
C H A P T E R
2
Figure 2.2
Laser Diode Insertion
The one-piece cover/clamp accommodates both 5.6 mm and 9 mm TO-can
devices. The clamp uses an O-ring to apply preload onto the device for good
thermal connection to the laser mounting plate. There are two receptacles on the
clamp, a smaller diameter one for 5.6mm devices and a larger diameter one for
9mm devices. Rotate the cover/clamp so that the correct receptacle aligns with
the device. Secure the cover/clamp using the two flat head captive screws.
Tighten until the cover/clamp is flush with the body of the mount. Figure 2.3
displays the mount with a laser and cover/clamp correctly installed. The laser is
now ready to test.