Newport Cornerstone 130B, User Manual

Page: 63 / 75

90088262 MCS130B
CORNERSTONE 130B MONOCHROMATORS
63
Here is the list of the error codes and strings that the CS130B can detect and report. Note t hat
some codes are positive and some are negative.
Error Code String Explanation
-104 Data Type Error Parameter in command has an incorrect
character.
-108 Parameter Not Allowed Not all commands can take a parameter.
-109 Missing Parameter Some commands require a parameter.
-113 Undefined Header CS130B could not find the requested command.
-115 Unexpected Number of
Parameters The command included too many or too few
parameters.
-150 String Data Error A parameter that should be a string had
something wrong with it; perhaps too long.
-151 Invalid String Data Parameter string not understood. E.g.
, “units
golly”.
-185 Label Too Long Filter and Grating labels
can’t be longer than 8
chars.
-186 Cmd Queue Overflow Too many commands have been queued.
-187 Cmd Too Long Command string too long (max 64 characters).
-220 Parameter Error
General parameter error e.g. “shutter 7”
-222 Data Out Of Range Numeric parameter value too large to store.
-224 Illegal Parameter Value
Parameter value can’t be realized, e.g. “gowave
99999”
-320 Storage Fault Error detected in non-volatile storage, e.g. cal
data or stored settings. This error is rare and is
usually cleared by cycling power.
-340 Calibration Failed User calibration encountered a problem.
-341 Calibration Data Invalid Something wrong with calibration parameter.
-350 Error Queue Overflow More than 10 errors have been detected.
-351
Serial Num Truncated
The serial number was too long.
-420 Query Unterminated Unit was asked to respond but no response is
available. Likely cause: unrecognized query,
e.g. “shuter?”.
402 Unable to Home Grating Hardware failure: grating motor unable to home.
403 Cannot Reach
Wavelength Typically when grating-change command results
in unobtainable wavelength.
404 Grating Halted Caused by grating or wavelength command
during firmware upgrade.
501 Filter Wheel Missing Filter wheel not detected at power-up.