viii
Specifications
Physical Specifications
Electronic Display and Control Unit
Dimensions:
7.2" x 3" x 1.5"
Weight:
500 grams
Enclosure:
Flame resistant ABS
Connectors:
Input: 8-pin sub-mini DIN
Analog Output: BNC
Charger:
DC power Jack, 5.5mm.
Photodetectors
See the appropriate
instruction manuals and
data sheets for these
specifications
Electrical Specifications
Electronic Display and Control Unit
Input Current To Power Conversion:
Displayed Power Reading
: Input Current (A) ÷
Detector Responsivity
(A/W) P=I/R(l)
Input Voltage Burden
:
5
µ
V at zero current input.
10
µ
V max. at full range,
except 100
µ
V max on 5mA
range.
Input Noise:
The noise performance of
the meter is ±1 A-D count
or better when in either the
linear or peak-to-peak
mode, regardless of the
sensor capacitance,
internal resistance or
feedback ranging resistor
(see limits below).
Input Voltage Drift:
±0.6mV/
o
C; ±1 mV/Mo.
Source Resistance:
>30k
Ω
Source Capacitance:
<14nF
(includes input cable)
Setting Time:
2 seconds to within 1 digit
of final reading
(fast mode)
Reading Rate:
2.5 readings per second
typical
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
