User Guide
NR-05-0001/1.0
When the installation is complete,
click the
Finish
button.
If selected, EKKODesk will be
launched.
At this point, the display driver and application are installed and available for use.
To continue with the configuration, the EKKO Projector hardware will need to be connected as described
in Section 2.3 .
To configure and use the
EKKO Projector adapter, run the
EKKODesk application from the
start menu:
Start
→
Programs
→
EKKODesk
This will place the icon shown in the
Windows XP toolbar. The small red
cross on the icon indicates that the
application has not been configured.
Clicking on this icon brings op the
EKKODesk menu.
Clicking the
Add/Remove
option
shows the Add and Remove
Projector dialog.
Clicking the
Remove
button
removes the selected projector from
the list.
Clicking the
Add
button shows the
add projector dialogue.
page 8 of 15
Newnham Research Ltd
