2008
Torrey Pine Fifth Wheel
by Newmar
8:3
SLIDE OUT FEATURES
WARNING
Read the following slide out room instructions before activating the switch.
CAUTION
The slide outs can be operated without utilizing the leveling system, but is
recommended to have the unit as level as possible.
General Instructions
IMPORTANT
The slide out room should be inspected for alignment every six (6) months. If
alignment is necessary, have the room adjusted.
1.
The slide out room can be stopped at any time by activating the slide out
switch. The room will reverse directions each time the switch is activated.
2.
If the slide out room stops before reaching the full “OUT” or “IN”
position, the slide out controller may need adjustment.
3.
To adjust the slide out controller, turn the adjustment screw clockwise to
increase the power and counter-clockwise to decrease the power.
CAUTION
Move the adjustment screw in small increments. Try moving the slide out room
again. Use caution. There is a potential for component or structural damage if
the screw is adjusted too high.
IMPORTANT
This screw does not adjust the slide out room speed. It sets the amount of
power required to move the room against the mechanical stops.
Summary of Contents for torrey pine 2008
