NewMar Scottsdale Class A 2006, Owner'S Manual

Page: 84 / 120

2006
Scottsdale Class A by Newmar
6:9
5.
Slide the pull strap to the right end of the roller and wrap it around the
main arm.
6.
Pull up on the lift handle and raise the arm assembly to the desired height.
Swing the handle in and allow the lock button to snap into one of the
holes. Repeat on the other side.
7.
Press the release lever at the bottom end of one main arm, pull the arm
assembly outward to a vertical position, and readjust height. Repeat on the
other side. Drive provided stakes through holes of each patio foot into the
ground.
8.
During rain, lower one end to allow water to flow off.
CAUTION
Whenever heavy or prolonged rain or wind is anticipated, or you will leave the
awning unattended, it is best to close the awning. Damage as a result of
weather is not covered by warranty.
Retracting
1.
Pull the stakes from the ground, swing the arm toward the vehicle, and
snap the patio foot into the bracket. Repeat on the other side.
2.
Raise the lift handle to release the lock button. Lower the main arm to the
stop plug. Swing the handle in to engage the lock button in a hole. Repeat
on other side.
3.
Loosen black adjustment knob, lift slider catch, and slide the rafter arm
down to the bottom of the main arm. Leave the black adjustment knob
loose. Repeat on other side.
4.
Grasp the pull strap and pull toward you. Flip the locking lever to the
ROLL UP position. Hold the awning in the down position until you are
ready to roll up the awning.
CAUTION
The awning roller tube is under great tension from internal springs, and will
begin to roll up as soon as the locking lever is moved to the "ROLL UP" position.
Great caution should be used to insure it does NOT fully retract in a swift,
uncontrolled manner. Damage to the RV, awning, and personal injury are
possible.