NewMar King Aire Diesel Pusher 2013, Manual

Page: 17 / 137

2013 King Aire Diesel Pusher
by Newmar
16
Weight Information
Below is a sample of a weight information label which may appear in your unit.
WEIGHING THE UNIT
The following definitions are given to help in communications of issues
of weight and your unit.
GAWR:
Gross Axle Weight Rating is the maximum permissible weight for an axle.
GCWR:
Gross Combination Weight Rating is the value specified by the manufacturer of the
vehicle as the maximum allowable loaded weight of this motorhome and any towed trailer or
towed vehicle.
GVWR:
Gross Vehicle Weight Rating is the maximum permissible weight of this fully loaded
motorhome. The GVWR is equal to or greater than the sum of the Unloaded Vehicle Weight
plus the Cargo Carrying Capacity.
UVW:
Unloaded Vehicle Weight is the weight of this motorhome as built at the factory with
full fuel, engine oil, and coolants. The UVW does not include cargo, fresh water, Propane
gas, or dealer installed accessories.
CCC:
Cargo Carrying Capacity is equal to GVWR minus each of the following: UVW, full
fresh (potable) water weight (including water heater), full Propane-Gas weight and SCWR.
GVW:
Gross Vehicle Weight is the weight of the unit with all items and supplies that are
loaded into the unit at any point in time.
SCWR:
Sleeping Capacity Weight Rating is the manufacturer’ s designated number of sleeping
positions multiplied by 154 pounds (70 kilograms).
NOTE:
The sales literature may give approximates or standards. Each individual unit may
weigh differently based on the factory and/or dealer options added. To assure the accuracy
of your weights be sure the unit is always level during weighing.
The unit has been built to comply with the component suppliers recommended limits and give
you a realistic CCC. When loading the unit, distribute the items so that not all of the weight
is added to one area of the unit. If you have questions as to what the weight of the unit is after
it has been loaded, take the unit to a drive-on scale or use individual wheel scales and verify
that the weights are within the limits of those specified for the unit.