NewMar Essex 2014, Manual

Page: 68 / 120

2014 Newmar Essex Diesel Pusher 67
AC POWER SCREENS LOAD SETTING SCREEN 1
The first Load Setting screen configures the
following settings:
i
Phase Detection Manual / Automatic
Set to Manual for Manual Phase Selection.
Set to Automatic for RV-C Transfer
Switch.
A RV-C Transfer Switch has the
capability of automatically detecting Dual
Phase (240 VAC) 50 Amp AC power
based on the available AC power source.
i
Default Phase Displays Selected Phase
Selects the default Phase setting for the
Load Shedding function.
i
Capacity - Single Phase (Amperage)
This setting sets the Load Shedding
Amperage value for the Single Phase
selection. This should normally be set to
30A or less.
i
Capacity Dual Phase (Amperage)
This setting sets the Load Shedding
Amperage value for the Dual Phase
selection. This should normally be set 50
Amps.
AC POWER SCREENS LOAD SETTING SCREEN 2
The second Load Setting screen configures
the following settings:
i
Load Shedding Enabled /
Disabled
Load Shedding Enabled allows the control
system to shed (turn off) system
configured AC powered devices in order
to maintain a maximum phase capacity
AC amperage usage.
i
Generator Settling Enabled / Disabled
This setting should always be set to
Enabled for proper Auto Gen operation.
i
Charger 1 Shedding Enabled / Disabled
This setting determines if the Battery
Charger #1 should be shed (turned off)
with the other Load Shedding devices.
i
Charger 2 Shedding Enabled / Disabled
This setting determines if the Battery
Charger #2 (if equipped) should be shed
(turned off) with the other Load Shedding
devices.