4
Walls out of plumb will not allow for full minimum / maximum options.
1
Acrylic Shower Layout
Position the wall channels at 13mm
off the tray edge as diagram below.
This allows for walls bowed or
leaning inwards up to 6mm. Reduce
the measurement off the tray edge if
walls dictate this.
Refer to table above.
Silicone bead on back
of wall channels prior
to installation.
Mark wall profile.
Fasten profile to wall.
SHOWER TYPE
WALL CHANNEL ADJUSTMENT
TRAY TYPE
900mm*900mm
868mm(Minimum) to 888mm(Maximum)
High Profile Tray
1000mm*1000mm
968mm(Minimum) to 988mm(Maximum)
High Profile Tray
915mm*915mm
883mm(Minimum) to 898mm(Maximum)
Low Profile Tray
1015mm*1015mm
983mm(Minimum) to 998mm(Maximum)
Low Profile Tray
NOTE: Make sure the correct shower is used on the correct tray.
B
A