Instructions
Newlec Helpline: 0800 783 6909
IMPORTANT
- The wall bracket
supplied with the heater must
be used and the heater must
be installed in the correct
orientation. The fixings should
be used to secure the bracket to
the particular wall on which the
heater will be installed. The heater
should be positioned observing
the minimum clearances stated
around the heater
- see
Fig. 1
,
Fig. 3
and
Fig. 4
.
MODEL
A
B
C
D
E
NLPH075E 298mm 263mm 620mm 430mm 108mm
NLPH125E 368mm 263mm 690mm 430mm 108mm
NLPH150E 368mm 263mm 690mm 430mm 108mm
NLPH200E 538mm 263mm 860mm 430mm 108mm
NLPH300E 538mm 263mm 860mm 430mm 143mm
Wall Mounting Instructions
Please read the instructions closely before first using the product. There is also a quick-start
guide on the page 10 if you need a reminder of how to use the basic functions in the future.
The heater is designed for wall mounting using the wall bracket supplied. It should only be
operated when in the upright position as shown - see
Fig.3
and
Fig.4.
All models are splash
proof to IP24. Before connecting the heater check that the supply voltage is the same as that
stated on the heater.
General Information
To mount the heater to the wall:
1. Remove wall mounting bracket from the back of the heater by depressing the spring latch
at the side of each bracket - see Fig.2.
2. Fix the wall bracket securely to the wall through the four screw holes. Ensure only screw
fittings provided are used for the particular wall type.
3. Present the heater to the wall bracket and engage bottom slots in the back with bracket hooks.
4. Press heater into locked position and ensure the clips on the top are engaged.
WARNING:
This product is heavy and care
should be taken in installation
8
