Newlec Helpline: 0800 783 6909 Manufacturers Address: Newey & Eyre Eagle Court 2, Hatchford Way, Birmingham B26 3RZ
IMPORTANT NOTICE
All wiring should be carried out by a competent person or a qualified electrician and should be fitted to IEE 17th Edition Wiring regulations
BS7671:2008. The circuit should be isolated before carrying out any work. Failure to adhere to the instructions will invalidate the warranty.
RPM 491
Instructions
The complete Newlec DALI network solution is provided with just four elements
NEWLEC DALI NETWORK SOLUTION OVERVIEW
The Newlec DALI network solution has been designed to make installation and set-up of a Newlec DALI system quicker and easier
for installers. With the increasing energy saving requirements to cut emissions and energy bills for consumers and businesses alike,
Newlec’s DALI network solution is here to meet these demands.
Newlec have achieved this by making the first range of sensors that can automatically configure DALI lighting ballasts, as well as the
more commonly used broadcast mode. The system provides presence and absence detection and delivers daylight harvesting to
ensure maximum energy efficiency. The Newlec DALI Occupancy Detector is a presence, absence and daylight harvesting sensor all
rolled into one.
In a brand new ‘out of the box’ installation of new DALI luminaires and with a new Newlec DALI Occupancy Detector, you can simply
wire the lighting, the Power Supply Unit and the Occupancy Detector together with the Multi-Purpose Connection Box and simply
accept the default settings of…
Broadcast mode
Timing
Daylight Harvesting
…and the Occupancy Detector with just a few pushes of the remote control will find and address all luminaires control gear on the
network and the installation is complete.
With just a few more button selections on the Occupancy Detector and the remote controller, the product can easily set up groups
and scenes as well as corridor modes, additional timing modes and the Occupancy Detector will also automatically daylight harvest to
maximise energy savings.
Unlike some manufacturers systems Newlec’s DALI Occupancy Detector sensors can be wired to control their own set of luminaires
using in built DALI group functions to give control by group and not just by broadcast alone.
Newlec DALI Occupancy
Detector
Newlec DALI Dual Purpose
Remote Control
Newlec DALI Power Supply Unit Newlec DALI multi-purpose
connection box
Image
Part No.
NL5701DALI
NL5711
NL5712
NL5713
Features
•
Presence and Absence
V
Detection
•
Automatic Daylight
V
Harvesting
•
Default Timing Modes
•
Broadcast and Group
V
Functions
•
Room & Corridor Mode
•
Manual Lux Level and
V
Sensitivity Control
•
Coloured Feedback LEDs
•
Walk Test
•
Dual Purpose control
V
options for End user and
V
Installers
•
Sets all non-default
V
functions
•
Sets Timing Room Modes
V
and Corridor Modes
•
Sets Min Arc Levels
•
25%, 50% and 100%
V
brightness pre sets
•
Override Functions
•
Remote Lux Control
•
Remote Feedback LEDs
•
3 x AAA Batteries supplied
•
18V d.c. 250mA
•
Connects to Multi-Purpose
V
Connection Box
•
Essential to supply power
V
to DALI network
•
10A Max for Lighting loads
•
Connects Lighting (ALL
V
TYPES) and DALI network
•
Connects Power Supply