SD35 User guide V1.0
17
Barcode Scanning
Basic Settings
Click "Settings"-"Scan" to enter the scan settings.
Scan engine on/off:
Turn on / off the barcode scanning function.
Out to Cursor:
Results of scanned barcode displayed at focus.
Scan Sound:
After the barcode scanning is finished, the tone will sound.
Scan Vibrate:
Vibration alert after barcode scanning.
Save Image:
Save the barcode picture to album.
Scan mode:
The device has a built-in three-minute scan mode. Select the fast
scan mode you are used to. It needs to be turned on and off to enable the
scan.
A,Long-press continuous scan:
In this mode, press and hold the scan button to
turn on the scan laser, release it to automatically turn off the scan laser, and if
the barcode is successfully scanned when the scan button is pressed, the scan
laser is turned on repeatedly.
B,Single scan:
In this mode, press the scan button to turn on the scan laser. If a
barcode is successfully scanned, the scan laser will automatically turn off. If no
barcode is scanned within 10 seconds, the scan laser will automatically turn off,
or press the scan button 1 second, the release laser is automatically turned off.
C,One-click continuous scan:
In this mode, press the scan button to turn on the
scanning laser. After the barcode is successfully scanned, the scanning light
will not turn off, and continuous scanning will be excited. Press the scan button
again to turn off the scanning laser.
Continuous Scan Internal:
Setting the continuous Scan Internal(ms).
Attached key value:
Special keys are added after the barcode output, such as
Summary of Contents for SPEEDATA SD35
Page 1: ...SD35 User Guide...