54
Chapter 5 Using the NQuire
Introduction
The NQuire receives its input via:
1D/2D barcode scan engine (NQuire350)
RFID (NFC) reader.
To scan a barcode or read an RFID tag with the NQuire, follow the instructions below. You may scan a
barcode in the
“Sample Barcodes” section in Appendix to check if the NQuire reads barcode properly.
Scanning Barcodes with NQuire 350
NQuire 350 is able to read 1D and 2D barcodes. It emits a red crosshair aiming pattern to help the user
to easily position the target barcode within the terminal
’s field of view to increase scan efficiency.
Omnidirectional Scanning (360°) Optimal Scan Distance