12
Chapter 4 Interfaces
Host Interface Connector
The following table lists the pin functions of the 12-pin host interface connector on the EM3296.
PIN#
Signal
I/O
Function
1
NC
-
Not connected.
2
VDD
-
3.3V
power supply.
3
GND
-
Power-supply ground.
4
RX
I
TTL level 232 receive data.
5
TX
O
TTL level 232 transmit data.
6
USB_D-
I/O
USB_D- differential data signal.
7
USB_D+
I/O
USB_D+ differential data signal.
8
NC
-
Not connected.
9
Buzz
O
Beeper output. External beeper driver circuit is needed to drive beeper.
10
LED
O
LED output. External LED driver circuit is needed to drive LED.
11
Reset
I
Reset signal input: Driving this pin low for 100us-500us resets the
engine.
12
nTrig
I
Trigger signal input: Driving this pin low for at least 10ms causes the
engine to start a scan and decode session.
Summary of Contents for NLS-EM3296
Page 1: ...NLS EM3296 OEM Scan Engine Integration Guide...
Page 6: ......
Page 14: ...8 Bottom View unit mm...
