nlscan.com
Page 1
About this guide
Introduction
This User Guide provides installation and programming instructions for the NLS-HR200 (
“
HR200
”
) .
Product speci
fi
cation and dimensions are also included.
Chapter Description
Getting to Start, explains the theory of operation and electrical interface of the HR200 bar code scanner. It
also describes how to install it and its technical speci
fi
cations.
USB Interface, describes how to use three protocols of USB connection to link between HR200 and
USB Host. Four protocols are USB HID-KBW, USB DataPipe, USB COM Port Emulation, HID-POS
respectively.
RS232 Interface, describes how to use the RS232 interface of the HR200 to link with a series Host. It mainly
explains the same communication parameters, including baud rate, parity check, data bits select, stop bits
select and hardware auto
fl
ow control.
PS/2 Interface, describes how to use PS/2 Interface of HR200 and parameters to link with a PS/2 port Host.
Symbols, lists all the available symbols and provides the parameters supported by the HR200.
OCR describes the OCR technology and provides the programming barcodes to enable/disable this feature.
Pre
fi
x/Suf
fi
x, lists all the types of Pre
fi
x/Suf
fi
x and provides the general programming barcode to program
them.
Message Interception & Pack, describes the functions of Message Interception & Pack and provides the
programming guide and barcode.
Batch Programming, describes the function and rules of Batch Programming.
Tool – Handy item for a task.
Attention – Important subject to be aware of or to avoid.
Tips – Helpful information about a topic or a feature.
Example – Illustration of how to use a feature.
Graphic Notations
