background image

Disclaimer 

 

© 2013 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved.

 

Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you 

should keep this manual for future reference. 

Do not disassemble the device or remove the seal label from the device. Otherwise, FuJian Newland Auto-ID Tech. Co., Ltd. 

does not assume responsibility for the warranty or replacement. 

All  pictures  in  this  manual  are  for  reference  only  and  actual  product  may  differ.  Regarding  to  the  product  modification  and 

update,  FuJian  Newland  Auto-ID  Tech.  Co.,  Ltd.  reserves  the  right  to  make  changes  to  any  software  or  product  to  improve 

reliability, function, or design at any time without notice. Besides, the information contained herein is subject to change without 

prior notice.

 

 

The products depicted in this manual may include software copyrighted by FuJian Newland Auto-ID Tech. Co., Ltd or a third 

party.  The  user,  corporation  or  individual,  shall  not  duplicate,  in  whole  or  in  part,  distribute,  modify,  decompile,  disassemble, 

decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders.   

This manual is copyrighted. No part of this publication may be reproduced or used in any form without written permission from 

Newland.

 

FuJian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above. 

 

 

FuJian Newland Auto-ID Tech. Co., Ltd. 

3F, Building A, No.1, Rujiang Xi Rd., Mawei, Fuzhou, Fujian, P.R. China. 350015. 

http://www.nlscan.com

 

 
 
Revision History 
 

Version 

Description 

Date 

V1.0.0 

Initial release. 

December 28, 2012 

V1.0.1 

Updates: Corrected inappropriate expressions and misspellings 

January 17, 2013 

 

 

 

Summary of Contents for EM2037 Series

























Reviews: