Newhouse Lighting BLF12BRZ Installation Download Page 2

General Wiring Diagram

CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply

Mounting Instructions

1. Inspect components to ensure that male and female port threads and
sealing surfaces are free of burs, nicks and scratches or any foreign
material.
2. Thread fixture into cover plate (not included) or ground stake (not
included) as shown.
3. Using two wrenches, hold fitting at desired aiming angle and tighten
locknut without exceeding the rated torque value of 350 in. lbs.
4. Inspect to ensure that the washer is seated flat on the mounting
surface.
5. Connect power to fixture, referencing wiring diagram on page 1. Make
sure the power supply is disconnected before installing.
6. Supply power to the fixture and enjoy your new LED Bullet Flood.
Operating characteristic
Voltage input: 120/277V 50/60 Hz Operating temp: -22°F to 104°F

WARNING

- To prevent personal injury or product damage only licensed electricians should install.

- To avoid electric shock or component damage disconnect power before attempting installation or servicing.

- This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.

- Disconnect product and allow cooling prior to servicing.

- Any alteration or modification of this product is expressly forbidden as it may cause serious personal injury, death, property damage and/or product malfunction.

- To prevent product malfunction and/or electrical shock this product must be properly grounded.

- Suitable for operation in ambient temperatures ranging from -40°c to 45°c.

- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product

   and the hazards involved.

- In 75°c supply conductors.

- Suitable for mounting within 1.2 m (4 ft) of the ground

PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION

SATISFACTION GUARANTEED

This product is covered under Newhouse Lighting’s Limited 5-Year Warranty. 

If for any reason you are not satisfied with your purchase, please contact us. 

Full warranty details located at www.newhouselighting.com

© Newhouse Lighting 2017. All rights reserved. Made in China. www.newhouselighting.com

Reviews: