background image

Use the Velcro 
straps to secure the 
Main Net to Center 
Frame and 

Collection Trays.

Unfold the Main 
Net (#5) and 
starting with the 
center, insert the 

Curved Support Tubes 
into the pockets sewn 
into the Main Net – You 
may need to lift the 
Collection Trays slightly to 
align the pockets to the Support Tubes.

Insert a Curved Net 
Support Tube into 
each of the 
Collection Trays.

Extend the red elastic bands under the 
table net and attach to your table net 
bracket tightening knob. If your table 
mounts the net outside the edge of the 

table, attach a Side Net Clip (#8) at 15 cm from the 
table net, with the open end closest to the net.

7

8

9

10

On each side of mount for 
the center/Long Support 
Tube, there are square slots 
to store the Short Support 
Tubes and once folded into 
an upright position the 
Collection Trays have Velcro 
to allow them to stay folded in position. 

If you want to utilize the ball recycling feature of 
the Versa-Net, you need to remove the Ball Bucket 
Extender before placing your Robo-Pong 
1040(+)/1050(+)/1055 into the Versa-Net system.

STORAGE

BALL MANAGEMENT

Newgy Industries, Inc.
Tennessee, USA
800-556-3949 • 615-452-6470
[email protected]
www.newgy.com

A

B

You can also use your new Versa-Net by placing 
your robot on top of the table in front of the net 
and practicing against the robot. When the robot 
stops throwing balls, shut off your robot, go to the 
back of the net, and pick up the collection bucket*. 
Refill your robot with balls from the bucket and 
you’re ready to go again! 

*If you're using your Robo-Pong on top of the table, place a bucket
(not included) under the collection net.

If you want to be able

to manage the number

of balls played per 

session, keep the Ball 

Bucket Extender on

your Robo-Pong 

1040(+)/1050(+)/1055 

when placing it into the 
Versa-Net system.

YOU’RE DONE!

6.13.18

C

Reviews: