MACHINE OPERATION:
Starting the equipment:
Always start the RX7 at the lowest
speed setting before increasing speed
as needed. Do not apply excessive
pressure
DO NOT LIFT THE EQUIPMENT OFF
THE GROUND WHILE STARTING!
Doing so can cause the tools to release from
the equipment and cause damage to the
surface being finished .
Stopping The Equipment:
Release trigger on hand grinder
Changing
Tools
and
Accessories:
Always turn off and disconnect power
from the machine when performing any
operations
to
the
bottom
of
the
machine!
When removing and inserting tool plates
or adapter plates, be sure to inspect
rubber grommets for signs for wear and
replace any damaged grommets.
Using grommets that are damaged
or missing can cause damage to the
equipment.
Summary of Contents for Rhino RX7
Page 1: ...Rhino Resurfacing Machine Operator s Manual RX7...
Page 11: ...www newgrind com...
Page 12: ......
