From inside the shed, install four
Screws (AA)
into the roof, two on each side wall.
Note: The screws also have to go through the Roof Brace (RB) at each end to properly secure the roof!
A second person on the outside of the shed should hold down the edge of the roof firmly at each screw location.
d.
RB
M
AA
(4)
Ensure
Repeat Roof (M)
is positioned against the back wall tongues.
From outside the shed, install one
Screw (AA)
at each corner.
Hold the edge of the roof down firmly at the corners while installing each screw.
Install remaining screws into remaining locations of back walls.
c.
AA
(8)
M
1.
2.
3.
Helpful Hint:
Installation is easier using a magnetic bit or starting
screws with a manual screwdriver to get seated. Pilot holes also
may be drilled using 1/8" bit.
