4
LetraTag
®
200B
User Guide
Using Your Label Maker
You print labels from a mobile device using the
DYMO LetraTag
Connect
app available on the Apple
®
App store or the Google
Play
™
store.
To print labels
1
From your mobile device’s app store, search for
DYMO LetraTag Connect
to
install the
DYMO LetraTag Connect
app.
2
Open the
DYMO LetraTag Connect
app and select a layout to create and
print a label.
NOTE:
Make sure the Bluetooth setting on your mobile device is turned on and the
printer is within range of your device.
Refer to the
section if you have problems printing.
Caring for the Label Maker
Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to keep
it working properly. Clean the cutter blade each time you replace the label
cassette.
The cutter blade is extremely sharp. Use caution when cleaning.
To clean the cutter blade
1
Lift to open the label maker cover.
2
Remove the label cassette.
3
Dampen a cotton ball with alcohol.
4
Place the tip of a ball-point pen or
pencil on the black post as
shown, and press the post down.
5
While holding down the post,
press and hold the cutter button
to expose the cutter blade.
6
Release the post and clean both
sides of the blade with the cotton
ball.
7
Release the cutter button.
8
After cleaning the blade, press and release the cutter button to return the
cutter blade to the home position.
You can also follow this procedure if the cutter blade becomes lodged in the
forward position and will not move.
Cutter
blade
Press and
hold
Summary of Contents for DYMO LetraTag 200B
Page 1: ...User Guide LetraTag 200B...
