3
LetraTag
®
200B
User Guide
Getting Started
Follow the instructions in this section to get started with your label maker.
Inserting the Batteries
The label maker uses 4 high-capacity AA alkaline
batteries.
To insert the batteries
1
Lift to open the cover.
2
Insert the batteries following the polarity
markings (+ and –).
3
Close the cover.
Safety Precautions
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh,
etc.) batteries.
Remove the batteries if the printer will not be used for a long period of time.
Inserting the Label Cassette
Your label maker uses DYMO LT label cassettes. Visit
www.dymo.com
for
information about purchasing additional label cassettes.
To insert the label cassette
1
Lift to open the cover.
2
Insert the cassette with the label positioned
as shown.
3
Press firmly until cassette clicks into place.
4
Close the cover and press to turn on the
power.
Power
The light will alternate from light to dark when the power is on. The power will
automatically turn off after a few minutes of inactivity.
Remove the batteries if the printer will not be used for a long period of time.
Summary of Contents for DYMO LetraTag 200B
Page 1: ...User Guide LetraTag 200B...
