background image

 

9. CUSTOMER SUPPORT 

 

Should you experience any difficulties with your Newcon 

OPTIK product, consult the enclosed manual. If the problem 

remains unresolved, contact our customer support department at 

(416) 663-6963 or Toll free at 1-877-368-6666.  Our operating 

hours are 9am-5pm, Monday - Friday, Standard East Time. 

 

At no time should equipment be sent back to Newcon without 

following the instructions of our technical support 

department.  

Newcon accepts no responsibility for unauthorized returns. 

 
 

To locate NEWCON Authorized Dealer call: 

Tel: (416) 663-6963 Fax: (416) 663-9065  

Email: [email protected]

 

Website: www.newcon-optik.com 

The defective products should be shipped to: 

From USA: 

2331 Superior Ave. Cleveland, OH 44114 

from all other countries: 105 Sparks Ave., Toronto, ON  

M2H 2S5, CANADA 

 
 

14 

 

Features of the SIB 16x40WP Gyro binocular 

 

 

Stabilized image 

 

Rigid construction 

 

Waterproof 

 

Surveillance in moving environment 

 

Alternative external power supply 

 

TABLE OF CONTENTS 

 

1.

 

Brief description 

2.

 

Appearance and controls 

3.

 

Technical characteristics 

4.

 

Supplied accessories 

5.

 

Operation instructions 

  5.1. Preparing the device for operation without image 

stabilization 

  5.2. Operation with image stabilization 
6.

 

Storage and maintenance instructions 

7.

 

Troubleshooting 

8.

 

Warranty 

9.

 

Customer support 

10.

 

Quality certificate 

 

 
 

Summary of Contents for SIB 16X40 WP









Reviews: