11
5.
OPERATION INSTRUCTIONS
To install a battery:
Slide the battery compartment cover down (9, Fig. 2)
Install the battery observing polarity
Don’t apply superfluous strength while pushing the
battery inside the compartment.
Close the compartment cover
If the battery does not fit the compartment easily, it means
that either polarity was reversed or the battery contacts
are jammed.
To take a battery out:
Slide the battery compartment cover down (9, Fig. 2)
Shake the rangefinder gently towards the open end of
the battery compartment
Pull out the battery
Note:
Battery in metal casing will diminish compass
accuracy. Non-magnetic batteries should be used for the
utmost compass performance.
LRM 3500CI is equipped with battery monitoring sensor.
If display shows “
LOW BATTERY”
warning when
battery voltage falls below 6.5V this indicates that the
battery is used up. You can still get readings, but the
battery needs to be replaced soon.
