17
Making certain the rifle is empty with no cartridge in
the chamber and the breech is open install
mechanical or laser bore sighter. Install laser bore
sighter in the muzzle of your rifle lining it up with the
scope as close as possible.
Looking through the scope as though you were going
to shoot you should see reticle produced by the unit
and a cross hair produced by the bore sighter. They
should line up with each other vertically, horizontally
and be in complete alignment. If they are not parallel
with each other, adjust the bore sighter in the
chamber.
Unscrew the protective caps of the reticle adjustment
screws. Turning those screws match reticle crosshairs
with the aimed point, provided by the mechanical
sight or laser bore sighter.
Remove the bore sighter from the muzzle. Make 2-3
shots. Having examined the target, make necessary
corrections. For example, in order to move the hit
point downwards and leftwards, adjustment screw
should be turned counter clockwise, in the Down and
Left directions. The aiming point will move upwards
and rightwards correspondingly.
If you are not hitting the paper target at all, move the
target closer until you consistently hit somewhere on
the target. You cannot make any scope adjustments if
