•
NEVER
aim active unit at intense light sources (i.e.
lights, headlamps, campfires, the moon, etc.)3
•
NEVER
reverse the polarity of a battery
•
NEVER
connect the unit to external power sources
•
ALWAYS
remove batteries when not in use for a long
period
•
ALWAYS
keep the objective lenses covered
when not in use
•
ALWAYS
store in a warm dry place when not in use
THANK YOU FOR PURCHASING THE NIGHT
VISION RIFLE SCOPE DN-140.
PLEASE DEMAND TO CHECK THE DEVICE FOR
PROPER OPERATION WHEN BUYING IT.
PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE USING.
2. OVERVIEW
The night vision rifle scope DN-140 is an
observational optico-electronic monocular device intended
for precise shooting, examining distant objects orientation at
nighttime conditions. The unit utilizes an image intensifier
which amplifies available moonlight,
4
8. TROUBLESHOOTING
The scope does not work.
- Check that the batteries are installed properly.
- Check the charge of the batteries. Replace if they are weak. Do
not use old batteries with new ones.
The image does not appear in focus.
Bring the inspected object to the center of the image.
Turning the objective lens ring (7), and/or the eye-piece (2)
adjust to achieve the clearest image on the screen. Repeat
the
steps of focusing if necessary
If the view still does not seem in focus, clean the lenses;
they could be foggy or dusty.
Unit flashes
It is normal for the unit to flash within the first 2 minutes of
activation. If the flashing continues afterwards the following
is a possible cause: bright environment (even with the cap
closed !)
Condensation accumulates on the parts.
It is O.K. to use the scope in cold. However, when the unit is
brought from the cold into a warm environment, it has to
warm up for up to 5 hours (not minutes !). Only then it is
allowed to turn it ON again.
Visibility decreases and / or disappears.
Bright light sources (moon, projectors or headlights) may
cause visibility to degrade or even completely disappear.
Move the scope away from the light source immediately.
13
