background image

 

WARRANTY 

Newco coffee brewers are warranted against defects in workmanship or materials, under normal use, for 90 days from 
the date of purchase. Brewer parts are warranted against defect for 12 months from date of purchase. 
Liability in all events is limited to the purchase price paid and liability under the aforesaid warranty is limited to replacing 
or repairing any part or parts which are defective in material or workmanship, and returned to our factory, shipping cost 
prepaid. No warranty expressed or implied, other than the aforesaid is made or authorized by Newco Enterprises, Inc. 
Prompt disposition will be made if item proves to be defective, within warranty. Before returning any item, write or call 
Newco, or the dealer, from whom the product was purchased, giving model number, serial number, and date of 
purchase, and describe the nature of the defect. If damage was incurred during transit to you, file claim with the carrier 
 

WIRING DIAGRAM 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Newco Enterprises, Inc. * 1735 South River Rd. * P.O. Box 852 * St. Charles, MO 63303 

Summary of Contents for VIP-LD







Reviews: