background image

   National Electronics & Watch Co,. Ltd. 

BC04 

 

M11-870 GPS watch User Manual 

Ref: XT7 M11-870D sw01-022 

 

Introduction 

 
Thank you for purchasing the GPS watch. This GPS watch is packed with personal Training 
features like speed, trip time, laps, etc.  GPS navigation features were integrated in various 
modes like Run mode and Waypoint mode. GPS can display your current location in an 
electronic map. It has also a dedicated Altimeter sensor for altitude and atmospheric pressure 
measurement. Watch features include 12/24H Time format, Chronograph, World time, 5 daily 
Alarms, Data, and Set modes. This watch can communicate with a PC to store and review your 
performance. This watch also has a power saving mode to increase operating hours. It uses a 
rechargeable battery that can be charged through USB port of your PC.  It also uses HRM belt 
(optional unit) with 2.4 GHz technology to monitor your heart rate for all your HR related 
information. 
 

 
Caring for your GPS watch:  

 
Clean your GPS watch and heart rate monitor with a dampened cloth preferably with mild 
detergent solution. Wipe dry using a dry cloth. Do not use chemical cleaners and solvents that 
may damage plastic components. 
 
Do not store your GPS watch to prolonged exposure to extreme temperatures as this may result 
to permanent damage to your unit. 
 

About GPS: 
 

Global Positioning System (GPS) is a satellite- based navigation system made up of a network 
of 24 or more satellites. GPS works best in clear weather condition, anywhere in the world, 24 
hours a day. Tall buildings may interfere with GPS accuracy. When 3 satellite signals are 
received, the watch will have 2D GPS fixed (Latitude and Longitude). When 4 or more satellite 
signals are received, the watch will have 3D GPS Fixed (Latitude, Longitude, and Altitude).  
 
 

Water immersion: 

 
This GPS watch is designed to be water resistant up to 3 ATM. It can resist water pressure up 
to 30 meters. After submersion to water, please make sure to wipe dry and air dry the unit 
before using or charging. 
 

Caution

: This unit is not intended to be used while swimming. Prolonged water submersion may 

cause electronic shorting in the unit which may cause minor skin burn or irritation. 
 

 
 

 

Getting Started 

 

Step 1) Know your watch: 

 

Push button location: 

 
 

 

 

 
 

Push button Function: 
 
S1 – 

Start / Lap / Increase adjust / Fast increase adjust 

S3

 – Stop / Save/ Decrease adjust / Fast decrease adjust 

S5 –

 View / Confirm 

S7 – 

Mode / Exit 

S9

 – GPS On / Hold to turn Off GPS 

S11

 – Light 

 

Note: Actual color of the watch and artwork may vary from style to style. 

 
 
 
 

Summary of Contents for M11-870
















Reviews: