Newco KK airpot, Service Manual

Page: 6 / 8

NEWCO ENTERPRISES, INC.
* www.newcocoffee.com * www.thermalcarafes.com * 1.800.325.7867 *
June 5, 2012 6
Cleaning Of The Brew-thru Stem Assembly - Continued:
Rinse all brew-thru stem assembly parts with clean water twice and let them air dry. Assemble brew-thru stem assembly
in reverse order. Place the brew-thru stem assembly into KK airpot and close lid.
YOUR KK AIRPOT IS READY TO USE FOR BREWING FRESH COFFEE AND IT WILL STAY HOT FOR HOURS FOR YOUR ENJOYMENT
Grab the brew-thru stem assembly as shown in the
figure and pull it apart, figure-7. Clean inside housing of the brew-thru stem with hot
soapy water and a brush, figure-8.
Remove the pouring spout from the brew-thru stem
assembly by pulling away from the brew-thru stem
assembly, figure-9. Watch for the stainless steel ball resting inside of the
housing. Remove it slowly and clean with hot soapy
water. With the help of hot soapy water and a small
thin black brush, clean inside of the brew-thru stem
housing and pouring spout, figure-10.
Fig-7 Fig-8
Fig-9 Fig-10