Bistro 1
NEWCO Enterprises Phone: 1.800.325.7867 Fax: 1.636.925.0029 12.09.10
- 7 -
4. Press “Settings” to save and proceed with the set-up
program. A time value (min: sec) will appear in the
display. If the switch that you are programming has
been set in a portion control mode, the value will
represent the current dispense time for the switch in
seconds(Fig 8). If the switch is in a continuous flow
(push and hold) mode, the time value will be 0:00
Shown in
figure 9
.
5. Press and release the “settings button to store switch
settings. The display will return to “SEL”. To program
another switch, repeat the instructions for programming
the selector switch, above. Pressing the settings button
after all the switches have been programmed will return
normal operating mode and the display will change to “-
- -“ as in figure 1, above.
Rinsing Instructions: Rinse the mixing chamber by pressing and
holding the “Rinse “ button until the bowl is clean and the water
runs clear.
Fig 8
08.1
Fig 9
00.0
