3
1.
MUTE
2.
Input mode display.
3.
AV/ TV switch
4.
◄: Volume down or to adjust the value of function
5.
To switch display mode
6.
Power on / off
7.
Item selection on menu.
8.
L/R: No use.
9.
►: Volume up or to adjust the value of function
10. To activate OSD menu
11. No use.
12. Item selection on menu.
A/V
A/V
A/V
A/V CABLE
CABLE
CABLE
CABLE
1.
5-pin AV signal input plug
2.
Red video 2 input plug
3.
Yellow video 1 input plug
4.
White audio input plug
5.
Power input jack
OPERAT
OPERAT
OPERAT
OPERATIIIION
ON
ON
ON
Attention: When installing the unit, make sure the 5-pin plug of the AV/TV cable
enclosed aim at the 5-pin AV/TV signal input jack of the unit and insert. Then the
other ends of the cable should be connected to the correspond signal (red: video2
input, yellow: video1 input, white: audio input, black: power input). The input voltage
should be between DC 11V-13V. Ensure to use output power is larger than 10w, or it
will not work properly!
1.
1.
1.
1. AV1/AV2
AV1/AV2
AV1/AV2
AV1/AV2
After connecting the power, the monitor will be at standby state. Press "POW" button
of the unit or on the remote control, the monitor begins to work, and press the "POW"
button again, the monitor return to standby state. When the unit is working you can
press "AV" to switch between AV1 and AV2.
1
2
3
4
5
All manuals and user guides at all-guides.com
