14
http://www.NewAir.com
6.
When setting the time and temperature at the same time, timing and the
room temperature display interactively at intervals of thirty seconds.
Meaning the timer display will show for thirty seconds and the temperature
display will be off. Then the temperature display will show for thirty seconds
and the timer display will be off. When the timing is not set, only the setting
temperature will display.
ECO MODE
When the space heater is on, press the
key to shift the product into the
ECO mode. The indicator
will switch to the default temperature between
64
o
F to 75
o
F. The PCT will stop working when the temperature is higher than
75
o
F. At the same time, the fan will stop working after rotating for ten seconds
with high speed. The fan will work with high speed when the temperature is
lower than 64
o
F. The fan will work with low speed when the temperature is
between 64
o
F and 75
o
F.
FAN COOLING FUNCTION
The fan will start to work when the heating power fan starts to work and the
fan will continue to function for ten seconds after the heating power fan stops
working. The numbers 10, 9, 8, 7, … 0
will be displayed. During this ten seconds
after shutting down the machine, the fan and the heating power fan will turn
off at the same time.
CONTINUOUS ELECTRIC MEMORY FUNCTION
1.
Under standby mode, press the
key and the unit will keep working with
the same status as the last setting, except the timing function.
2.
The machine will work in a continuous mode after one minute and the
brightness of the display section should be reduced to one-third of the
normal brightness, solving the problem of the LED-lamp shining in the night.
It will restore the brightness after operation.
