INSTALLATION
Before connecting the appliance to a power source, let it stand upright
for approximately 2 hours.
This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
Before operating your cooler for the first time, follow these steps:
•
Remove the exterior and interior packing.
•
Clean the interior surface of the unit with lukewarm water and a soft cloth.
•
Place the cooler on a level surface that will be strong enough to support the
unit whenit is fully loaded. To level your cooler, adjust the front feet located
at the bottom of the unit.
ADDITIONAL NOTES
•
The appliance should not be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience.
•
Children should not play with the appliance. Cleaning and user maintenance
should be performed under adult supervision.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons to avoid a safety hazard.
•
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
•
Do not use mechanical devices or means other than those recommended by
the manufacturer to accelerate the defrosting process.
•
Do not damage the refrigerant circuit.
•
Do not use electrical appliances other than those recommended by the
manufacturer inside the storage compartments of the appliance.
•
Do not store explosive substances such as aerosol cans with a flammable
propellant in the appliance.
•
This appliance is intended for use only in the household, office and similar
environments.