5
•
C
AUTION
:
It is normal for the plug to feel warm to the touch;
however, a loose fit between the AC outlet (receptacle) and plug may
cause overheating and damage/distortion to the plug. Contact a
qualified electrician to replace a loose or worn outlet.
•
To disconnect the heater, first turn the dial to the OFF position, then
remove the plug from the outlet. Never pull the plug by the cord.
•
No object should be inserted into any part of the heater at any time.
•
To prevent a possible fire, do not block any air intakes or exhaust in
any manner (if applicable). Do not use this heater on soft surfaces, like
a bed, where openings may become blocked (if applicable).
•
A heater has hot and arcing parts inside. Do not use it in the areas
where gasoline, paint, or flammable liquids are used or stored.
•
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or
injury to persons.
•
C
AUTION
:
Avoid the use of an extension cord because the extension
cord may overheat and cause a risk of fire. However, if you have to use
an extension cord, the cord must be No. 14 AWG minimum size and
rated not less than 1875 W.
•
The output of this heater may vary and its temperature may become
intense enough to burn exposed skin. Use of this heater is not
recommended for persons with reduced sensitivity to heat or an
inability to react quickly enough to avoid burns.
•
Before using the unit, check if the voltage indicated corresponds with
the outlet you intent to use (120V).
