7
OPERATING INSTRUCTIONS
A Name You Can Trust
The GFCI on the plug of this fan has 2 buttons"TEST" and "RESET". If you wish to
see if the GFCI circuit is functioning properly press the "TEST" button. The fan will
immediately shut off as if the GFCI has been activated and the window between
the button will change to black. This lets you know the GFCI circuit has been
ctivated. Press the "RESET" button and the fan can be turned on again and the
window between the buttons will show orange. This indicates the GFCI circuit has
not been activated and the fan should operate normaly.
GFCI OPERATIONS
1. Place the fan on a level surface. Plug the GFCI plug into a standard 120V AC
3-Prong wall outlet.
2. Attach the Valve(S) onto a standard outdoor hose. Turn your water on at the
spigot and use the lever on the valve(S) to turn water on and off.
3. To turn oscillation mode on, push the Clutch Knob (G). Pull the Clutch Knob (G)
up to turn oscillation off.
4. To adjust the air flow upward or downward, simply tilt the fan head with hand
and move to desired angle.
5. Control speed by pushing the desired button :
0 - OFF, 1 - low, 2 - medium, 3 - high
6. The height of the fan can be adjusted by loosening the height adjustment
knob (O) and carefully adjusting the Internal Pole(N). the fan and retightening
Height adjustment knob(O). Always ensure the waterproof cover(L) covers the
Height adjustable Knob(O) after adjusting the Internal Pole(N).
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, do not plug the pins into the socket.
2. To ensure adequate air circulation to the motor. Keep vents at the rear of the
motor housing from dust, fluff and etc. A vacuum cleaner can not be used to
clean these vents before unplug. Do not disassemble the fan remove fluff.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
Do not use any abrasive detergent or solvents to avoid scratching the sufrace.
Do not use of the following as a cleaner: gasoline, thinner, bending.
4. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTIONS
